The report shows a value of 0, while the RI voltage is normal. The reset voltage for the first chip (RST) is 0, while the other voltages are normal. What could be the possible explanation for this anomaly?

BTC 69488.33USD

LTC 54.34USD

XRP 1.35USD

DOGE 0.09USD

ETH 2148.68USD

ETC 8.7USD

BNB 604.71USD

SOL 82.27USD

ALPH 0.05USD

KAS 0.03USD

ALEO 0.04USD

Post Q&A

HashBoard

PSU

Control board

Overclock

Downclock

Liquid cooling

Mine construction

Operation and maintenance

The report shows a value of 0, while the RI voltage is normal. The reset voltage for the first chip (RST) is 0, while the other voltages are normal. What could be the possible explanation for this anomaly?

@Sunny Anusi

2023-07-08 10:28

1300

COMMENTS1

@Ada 2023-07-10 10:40

Check if the fixture is functioning properly or if a reboot is required. Verify the reliability and integrity of the fixture. Investigate any potential issues with the data cable interface. Abnormal resistances at the interface are often the cause. By performing these checks, you can identify and address any issues related to the fixture or data cable interface that may be causing the abnormal RST reset voltage.