62085.59USD
42.11USD
1612.02USD
0.03USD
7.05USD
587.84USD
0.03USD
64.88USD
0.03USD
1.13USD
0.08USD
Post Q&A
HashBoard PSU Control board Overclock Downclock Liquid cooling Mine construction Operation and maintenance
The 3rd hashboard has no hashrate
@Ada
2023-07-08 12:24
1593
0
0
What could be the problem causing frequent garbled output on the fixture?
@Sunny Anusi
2023-07-08 12:17
2275
0
0
What could be the problem causing frequent garbled output on the fixture?
@Sunny Anusi
2023-07-08 12:17
2230
0
0
Can 1397AD and 1397AG be mixed and used interchangeably?
@Sunny Anusi
2023-07-08 12:16
1673
0
0
Update the official website firmware results in the hashrate as shown in this image. What is the problem?
@Sunny Anusi
2023-07-08 12:14
2445
0
0
The hashboard can pass the single-board test but chip 34 RI voltage only 1.3V.
@Sunny Anusi
2023-07-08 12:12
1662
0
0
All the chips have been tested, but temperature 0 and all chips' hashrate reported as [00].
@Sunny Anusi
2023-07-08 12:12
1694
0
0
S9 single-board test showed Nonce [0] from chip 56, why this happened?
@Sunny Anusi
2023-07-08 12:12
1706
0
0
See the below single-board test result. There are 8.4V,8.5V domain voltage, replacing chip 1 did not work.
@Sunny Anusi
2023-07-08 12:11
7192
0
0
No hashrate, replaced several PSU, but did not solve it.
@Sunny Anusi
2023-07-08 12:10
1685
0
0
In the case of the S9K miner, why is there a decrease in computational power for hashboards 41-50 after the 40th hashboard?
@Sunny Anusi
2023-07-08 12:10
1663
0
0
If the chips are confirmed to be in good condition but there is no computational power, how can we determine if the machine itself is functioning properly?
@Sunny Anusi
2023-07-08 12:09
2439
0
0
How can we accurately identify which chip is faulty when the LDO resistance is abnormal and not functioning properly?
@Sunny Anusi
2023-07-08 12:09
1609
0
0
When a single chip reads less than 458 instead of the expected 912, even after replacing it with 4-5 different chips, what could be the source of this problem?
@Sunny Anusi
2023-07-08 12:07
1651
0
0
If the chip CLK value is zero while other aspects appear to be fine, what could be the issue？
@Sunny Anusi
2023-07-08 12:07
1648
0
0
Several boards have been tested, and all of them show a temperature sensor reading of 0. Even after replacing the three temperature sensor files, the issue persists. What could be the problem causing this issue?
@Sunny Anusi
2023-07-08 11:50
1698
0
0
How is the temperature of the hashboard uploaded? When encountering a signal interruption where the temperature is not displayed, how should the issue be investigated and resolved?
@Sunny Anusi
2023-07-08 11:43
1689
0
0
The total hashrate is consistently insufficient, and there is no temperature reading. The individual board tests show no issues, but the third board continues to lack computational power.
@Sunny Anusi
2023-07-08 11:42
1647
0
0
If the temperature reading of the 8th board on the backend interface is incorrect, how should it be repaired?
@Sunny Anusi
2023-07-08 11:41
1737
0
0
The last five voltage domains have voltage, while the other domains do not. The 8.5V is present, but the LDOs have no voltage. What could be the problem causing this issue?
@Sunny Anusi
2023-07-08 11:40
1698
0
0
PgUp34567PgDn
Active Users
@Ada
43 participate in
@Sunny Anusi
37 participate in
@Yoda
34 participate in
@BTC-Miner
18 participate in
@Bogard
3 participate in
@jread352
2 participate in

No. 199, Zhaojuesi South Rd, Chenghua District, Chengdu, Sichuan, China

No.14, Jian'an Rd, Bao An District, ShenZhen, GuangDong, China

+86 15390421113

minerfixesofficial@gmail.com

About Us Contact Us FAQ News
Bitaxe Project Bitaxe Github OSMU Official OSMU Discord Bitaxe Web Flasher
Privacy Policy Terms & Conditions
2022 Minerfixes - All Rights Reserved